PC problem - Help!!

[baros]

Ισχύει.

Και τα μαιμου 7αρια. 

 

[glaskos]

Και τα μαιμου 7αρια. 

κανονικα ultimate εχω αλλα δυστυχως τα 10ρια εχουν μονο profedional και enterprise
λογικα το serial key θα πιανει στα proffesional 

 

[dude33]

:S

Oλα εντάξει.Στο δεξί συρτάρι σου έχω και την απόδειξη!Και να αγοράσεις γάλα γιατί αυτό έχει λήξει απο το 2009.

 

[sperminator_tx]

τι ειδους αρχειο ειναι αυτο που προσπαθεις να διαβασεις ?

προς το παρον εγκατασταση του recuva και scan - ειναι ευκολο - μπας και βρεθει κανενα "διαγραμμενο" αντιγραφο του αρχειου μεσα στο σκληρο (ή σε κανενα tmp, cache, κλπ φακελο)


να εχεις υποψη σου οτι τα corrupted αρχεια συνηθως δεν διαβαζονται - μπορει να καταληξεις πχ με καμια εικονα σαν την παρακατω
https://[URL unfurl="true"]www.pentaxforums.com/forums/attachments/38-photographic-technique/10959d1208418224-corrupted-raw-file-bad-sd-card-imgp3082.jpg&key=72dafe75a55d3ee79e0eca17e92561668b215a65e2e832c084e872b29e7a3b33[/img[/URL]]





[/quote]συγκεκριμενα ειχα σωσει καποιες φωτογραφιες
οκ,εκανα τελικα μια απλη σαρωση κ διορθωθηκε το προβλημα
θενκς

 

[ADMIRAL GR]

Oλα εντάξει.Στο δεξί συρτάρι σου έχω και την απόδειξη!Και να αγοράσεις γάλα γιατί αυτό έχει λήξει απο το 2009.

Μην του τα λες ετσι απότομα μην εχουμε τιποτα ...απώλειες!

 

[Κωλόγατο]

Ρε παιδια ξερει κανεις γιατι δεν μπορω να δω στο youtube με 720; Μου τα πεταει απο μονο του στα 240 η στα 360. Κι ουτε εκπομπες απο τα σαιτ των καναλιων μπορω να δω χωρις να κολλησει και να μου σπασει τα νευρα.

 

[AntonisAnt2]

μαγκες σειρα μου να σας προβληματισω

(μονο για δυνατους λυτες  )

το λινουξακι μου οταν κανω power on, ξεκιναει μια χαρα, περναει το grub, βλεπει τους δισκους (2 ssd σε mirror raid) και παγωνει

με reset (το μικρο κουμπακι διπλα στο διακοπτη power) επανερχεται και δουλευει χωρις κανενα προβλημα


καμια προταση ?

 

[LoneMarvel]

μαγκες σειρα μου να σας προβληματισω

(μονο για δυνατους λυτες  )

το λινουξακι μου οταν κανω power on, ξεκιναει μια χαρα, περναει το grub, βλεπει τους δισκους (2 ssd σε mirror raid) και παγωνει

με reset (το μικρο κουμπακι διπλα στο διακοπτη power) επανερχεται και δουλευει χωρις κανενα προβλημα


καμια προταση ?

Καλησπέρα έχεις δοκιμάσει να τρεξεις dmesg να δεις τα logs.
Ποια διανομή έχεις;
Μήπως άλλαξες κάτι στο hardware τελευταία;

 

[AntonisAnt2]

Καλησπέρα έχεις δοκιμάσει να τρεξεις dmesg να δεις τα logs.
Ποια διανομή έχεις;
Μήπως άλλαξες κάτι στο hardware τελευταία;

τελευταια αλλαγη στο hardware ηταν το καλοκαιρι που εβαλα τους δισκους

και που τρεχω dmesg δεν βγαζω ακρη 


για δες το σεντονακι 

[size=6pt]
[    0.000000] Linux version 4.9.0-11-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.189-3+deb9u1 (2019-09-20)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G41M-ES2L/G41M-ES2L, BIOS F6 11/04/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]  00000-9FFFF write-back
[    0.000000]  A0000-BFFFF uncachable
[    0.000000]  C0000-CDFFF write-protect
[    0.000000]  CE000-EFFFF uncachable
[    0.000000]  F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]  0 base 000000000 mask F00000000 write-back
[    0.000000]  1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]  2 base 100000000 mask FC0000000 write-back
[    0.000000]  3 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]  4 disabled
[    0.000000]  5 disabled
[    0.000000]  6 disabled
[    0.000000]  7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000f5340-0x000f534f] mapped at [c00f5340]
[    0.000000] initial memory mapped: [mem 0x00000000-0x13dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x139f6000, 0x139f6fff] PGTABLE
[    0.000000] BRK [0x139f7000, 0x139f8fff] PGTABLE
[    0.000000] BRK [0x139f9000, 0x139f9fff] PGTABLE
[    0.000000] BRK [0x139fa000, 0x139fafff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35d15000-0x36e81fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6D40 000014 (v00 GBT  )
[    0.000000] ACPI: RSDT 0x00000000BFEE3040 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000BFEE3180 0043B3 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000BFEE7680 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEE7700 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000BFEE7740 00644A (v01 GBT    GBT  B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 0x00000000BFEE7580 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000BFEEE4B0 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4230MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]  mapped low ram: 0 - 379fe000
[    0.000000]  low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]  Normal  [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]  HighMem  [mem 0x00000000379fe000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]  node  0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]  node  0: [mem 0x0000000000100000-0x00000000bfedffff]
[    0.000000]  node  0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048190
[    0.000000] free_area_init_node: node 0, pgdat d3805c40, node_mem_map f3015024
[    0.000000]  DMA zone: 36 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 3998 pages, LIFO batch:0
[    0.000000]  Normal zone: 1967 pages used for memmap
[    0.000000]  Normal zone: 223742 pages, LIFO batch:31
[    0.000000]  HighMem zone: 820450 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu s50828 r0 d31092 u81920
[    0.000000] pcpu-alloc: s50828 r0 d31092 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1046187
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-686-pae root=UUID=40cd7ef0-053c-4906-b24c-6dcc0d216640 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4117424K/4192760K available (5927K kernel code, 660K rwdata, 1728K rodata, 764K init, 440K bss, 75336K reserved, 0K cma-reserved, 3281800K highmem)
[    0.000000] virtual kernel memory layout:
                  fixmap  : 0xffd36000 - 0xfffff000  (2852 kB)
                  pkmap  : 0xffa00000 - 0xffc00000  (2048 kB)
                  vmalloc : 0xf81fe000 - 0xff9fe000  ( 120 MB)
                  lowmem  : 0xc0000000 - 0xf79fe000  ( 889 MB)
                    .init : 0xd3823000 - 0xd38e2000  ( 764 kB)
                    .data : 0xd35ca1d4 - 0xd3821180  (2395 kB)
                    .text : 0xd3000000 - 0xd35ca1d4  (5928 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2399.873 MHz processor
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.74 BogoMIPS (lpj=9599492)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004039] ACPI: Core revision 20160831
[    0.007325] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.007370] Security Framework initialized
[    0.007372] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007380] AppArmor: AppArmor disabled by boot time parameter
[    0.007398] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007400] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008149] mce: CPU supports 6 MCE banks
[    0.008156] CPU0: Thermal monitoring enabled (TM2)
[    0.008160] process: using mwait in idle threads
[    0.008168] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.008169] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.008171] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.008172] Spectre V2 : Mitigation: Full generic retpoline
[    0.008173] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.008174] Speculative Store Bypass: Vulnerable
[    0.008204] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.008463] Freeing SMP alternatives memory: 24K
[    0.011047] ftrace: allocating 24172 entries in 48 pages
[    0.028085] smpboot: Max logical packages: 1
[    0.028092] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
[    0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.068000] core: PEBS disabled due to CPU errata
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:            000000ffffffffff
[    0.068000] ... max period:            000000007fffffff
[    0.068000] ... fixed-purpose events:  3
[    0.068000] ... event mask:            0000000700000003
[    0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068000] CPU 1 irqstacks, hard=f75a6000 soft=f75a8000
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.068000] CPU 2 irqstacks, hard=f75dc000 soft=f75de000
[    0.068000]  #2
[    0.008000] Initializing CPU#2
[    0.070279] CPU 3 irqstacks, hard=f7614000 soft=f7616000
[    0.070279]  #3
[    0.008000] Initializing CPU#3
[    0.072032] x86: Booted up 1 node, 4 CPUs
[    0.072032] smpboot: Total of 4 processors activated (19198.98 BogoMIPS)
[    0.076289] devtmpfs: initialized
[    0.076344] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.076344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.076344] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.076344] pinctrl core: initialized pinctrl subsystem
[    0.076445] NET: Registered protocol family 16
[    0.088008] cpuidle: using governor ladder
[    0.104007] cpuidle: using governor menu
[    0.104071] ACPI: bus type PCI registered
[    0.104075] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.104176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.104179] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.104179] PCI: Using MMCONFIG for extended config space
[    0.104180] PCI: Using configuration type 1 for base access
[    0.120062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.120108] ACPI: Added _OSI(Module Device)
[    0.120110] ACPI: Added _OSI(Processor Device)
[    0.120111] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120112] ACPI: Added _OSI(Processor Aggregator Device)
[    0.123738] ACPI: Dynamic OEM Table Load:
[    0.123744] ACPI: SSDT 0x00000000F7635C00 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.123974] ACPI: Dynamic OEM Table Load:
[    0.123979] ACPI: SSDT 0x00000000F7620200 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.124193] ACPI: Dynamic OEM Table Load:
[    0.124198] ACPI: SSDT 0x00000000F76B2000 000152 (v01 PmRef  Cpu2Ist  00003000 INTL 20040311)
[    0.124403] ACPI: Dynamic OEM Table Load:
[    0.124408] ACPI: SSDT 0x00000000F76B2400 000152 (v01 PmRef  Cpu3Ist  00003000 INTL 20040311)
[    0.124831] ACPI: Interpreter enabled
[    0.124870] ACPI: (supports S0 S3 S4 S5)
[    0.124871] ACPI: Using IOAPIC for interrupt routing
[    0.124906] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.131123] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.131129] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.131438] PCI host bridge to bus 0000:00
[    0.131441] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.131443] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.131445] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.131447] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.131449] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[    0.131451] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.131462] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.131601] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[    0.131646] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.131788] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.131806] pci 0000:00:1b.0: reg 0x10: [mem 0xf5000000-0xf5003fff 64bit]
[    0.131879] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.131951] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.132015] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.132055] pci 0000:00:1d.0: reg 0x20: [io  0xe300-0xe31f]
[    0.132141] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.132201] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.132241] pci 0000:00:1d.1: reg 0x20: [io  0xe000-0xe01f]
[    0.132327] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.132385] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.132424] pci 0000:00:1d.2: reg 0x20: [io  0xe100-0xe11f]
[    0.132509] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.132569] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.132609] pci 0000:00:1d.3: reg 0x20: [io  0xe200-0xe21f]
[    0.132695] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.132760] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.132776] pci 0000:00:1d.7: reg 0x10: [mem 0xf5004000-0xf50043ff]
[    0.132913] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.132974] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.133083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.133145] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.133224] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.133229] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.133233] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.133236] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.133374] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.133387] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.133396] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.133405] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.133413] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.133422] pci 0000:00:1f.1: reg 0x20: [io  0xf000-0xf00f]
[    0.133442] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.133443] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.133445] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.133447] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.133568] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.133581] pci 0000:00:1f.2: reg 0x10: [io  0xe800-0xe807]
[    0.133589] pci 0000:00:1f.2: reg 0x14: [io  0xe900-0xe903]
[    0.133597] pci 0000:00:1f.2: reg 0x18: [io  0xea00-0xea07]
[    0.133605] pci 0000:00:1f.2: reg 0x1c: [io  0xeb00-0xeb03]
[    0.133613] pci 0000:00:1f.2: reg 0x20: [io  0xec00-0xec0f]
[    0.133650] pci 0000:00:1f.2: PME# supported from D3hot
[    0.133768] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.133819] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.134006] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[    0.134021] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.134033] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.134046] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.134054] pci 0000:01:00.0: reg 0x24: [io  0xc000-0xc07f]
[    0.134063] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.134184] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.134198] pci 0000:01:00.1: reg 0x10: [mem 0xf2000000-0xf2003fff]
[    0.134357] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.134360] pci 0000:00:01.0:  bridge window [io  0xc000-0xcfff]
[    0.134363] pci 0000:00:01.0:  bridge window [mem 0xf0000000-0xf2ffffff]
[    0.134367] pci 0000:00:01.0:  bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.134421] pci 0000:02:01.0: [10ec:8169] type 00 class 0x020000
[    0.134438] pci 0000:02:01.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.134448] pci 0000:02:01.0: reg 0x14: [mem 0xf4000000-0xf40000ff]
[    0.134490] pci 0000:02:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.134522] pci 0000:02:01.0: supports D1 D2
[    0.134524] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.134624] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.134627] pci 0000:00:1e.0:  bridge window [io  0xd000-0xdfff]
[    0.134631] pci 0000:00:1e.0:  bridge window [mem 0xf3000000-0xf4ffffff]
[    0.134647] pci 0000:00:1e.0:  bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.134649] pci 0000:00:1e.0:  bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.134651] pci 0000:00:1e.0:  bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.134653] pci 0000:00:1e.0:  bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.134655] pci 0000:00:1e.0:  bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[    0.134665] pci_bus 0000:00: on NUMA node 0
[    0.135492] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.135572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.135649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.135727] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.135804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.135882] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.135959] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.136043] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.136185] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.136308] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.136308] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.136308] vgaarb: loaded
[    0.136308] vgaarb: bridge control possible 0000:01:00.0
[    0.136308] PCI: Using ACPI for IRQ routing
[    0.142464] PCI: pci_cache_line_size set to 64 bytes
[    0.142505] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.142507] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[    0.142678] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.142678] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.142678] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.144027] clocksource: Switched to clocksource hpet
[    0.154243] VFS: Disk quotas dquot_6.6.0
[    0.154281] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.154404] pnp: PnP ACPI init
[    0.154629] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.154632] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.154634] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.154637] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.154639] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.154644] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154743] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.155089] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.155363] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.155636] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.155782] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.155842] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.155933] system 00:07: [io  0x0400-0x04cf] could not be reserved
[    0.155937] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156228] system 00:08: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.156232] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156486] system 00:09: [mem 0x000ce600-0x000cffff] has been reserved
[    0.156489] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.156491] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.156493] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.156496] system 00:09: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.156498] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.156501] system 00:09: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.156503] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.156506] system 00:09: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.156508] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.156510] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.156513] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.156515] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.156518] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[    0.156521] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.156528] pnp: PnP ACPI: found 10 devices
[    0.156533] PnPBIOS: Disabled
[    0.195253] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.195279] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[    0.195282] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.195284] pci 0000:00:01.0:  bridge window [io  0xc000-0xcfff]
[    0.195288] pci 0000:00:01.0:  bridge window [mem 0xf0000000-0xf2ffffff]
[    0.195291] pci 0000:00:01.0:  bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.195297] pci 0000:02:01.0: BAR 6: assigned [mem 0xf3000000-0xf301ffff pref]
[    0.195299] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.195302] pci 0000:00:1e.0:  bridge window [io  0xd000-0xdfff]
[    0.195306] pci 0000:00:1e.0:  bridge window [mem 0xf3000000-0xf4ffffff]
[    0.195315] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.195317] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.195319] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.195321] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.195323] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.195325] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.195327] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[    0.195329] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[    0.195331] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.195333] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf4ffffff]
[    0.195335] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.195337] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.195339] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.195341] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.195343] pci_bus 0000:02: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.195489] NET: Registered protocol family 2
[    0.195732] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.195746] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.195768] TCP: Hash tables configured (established 8192 bind 8192)
[    0.195791] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.195798] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.195856] NET: Registered protocol family 1
[    0.216193] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.216205] PCI: CLS 32 bytes, default 64
[    0.216265] Unpacking initramfs...
[    0.629958] Freeing initrd memory: 17844K
[    0.630672] audit: initializing netlink subsys (disabled)
[    0.630696] audit: type=2000 audit(1579857511.628:1): initialized
[    0.631221] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.631311] zbud: loaded
[    0.632493] bounce: pool size: 64 pages
[    0.632526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.632579] io scheduler noop registered
[    0.632581] io scheduler deadline registered
[    0.632610] io scheduler cfq registered (default)
[    0.632964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.632972] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.632993] intel_idle: does not run on family 6 model 15
[    0.633012] tsc: Marking TSC unstable due to TSC halts in idle
[    0.633516] GHES: HEST is not enabled!
[    0.633597] isapnp: Scanning for PnP cards...
[    0.986707] isapnp: No Plug & Play device found
[    0.986792] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.007231] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.027708] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.028233] Linux agpgart interface v0.103
[    1.028970] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[    1.029445] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.029452] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.029706] mousedev: PS/2 mouse device common for all mice
[    1.029773] rtc_cmos 00:01: RTC can wake from S4
[    1.029908] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.029931] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.030028] ledtrig-cpu: registered to indicate activity on CPUs
[    1.030604] NET: Registered protocol family 10
[    1.030934] mip6: Mobile IPv6
[    1.030937] NET: Registered protocol family 17
[    1.030940] mpls_gso: MPLS GSO support
[    1.031274] microcode: sig=0x6fb, pf=0x10, revision=0xb6
[    1.031384] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.031388] Using IPI No-Shortcut mode
[    1.031638] registered taskstats version 1
[    1.031661] zswap: loaded using pool lzo/zbud
[    1.031820] ima: No TPM chip found, activating TPM-bypass!
[    1.031822] ima: Allocated hash algorithm: sha256
[    1.032105] rtc_cmos 00:01: setting system clock to 2020-01-24 09:18:32 UTC (1579857512)
[    1.032163] PM: Hibernation image not present or could not be loaded.
[    1.032526] Freeing unused kernel memory: 764K
[    1.032619] Write protecting the kernel text: 5932k
[    1.032708] Write protecting the kernel read-only data: 1732k
[    1.032709] NX-protecting the kernel data: 4308k
[    1.032925] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.051202] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.051314] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.051335] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.066530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.087695] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.087824] r8169 0000:02:01.0 (unnamed net_device) (uninitialized): not PCI Express
[    1.088219] r8169 0000:02:01.0 eth0: RTL8169sb/8110sb at 0xf820e000, 10:fe:ed:05:80:34, XID 10000000 IRQ 19
[    1.088222] r8169 0000:02:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    1.088540] ACPI: bus type USB registered
[    1.088575] usbcore: registered new interface driver usbfs
[    1.088592] usbcore: registered new interface driver hub
[    1.088630] usbcore: registered new device driver usb
[    1.089524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.090009] ehci-pci: EHCI PCI platform driver
[    1.090198] uhci_hcd: USB Universal Host Controller Interface driver
[    1.090238] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.090248] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.091682] SCSI subsystem initialized
[    1.093862] libata version 3.00 loaded.
[    1.094175] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.094372] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf5004000
[    1.108169] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.108251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.108253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.108255] usb usb1: Product: EHCI Host Controller
[    1.108257] usb usb1: Manufacturer: Linux 4.9.0-11-686-pae ehci_hcd
[    1.108259] usb usb1: SerialNumber: 0000:00:1d.7
[    1.108458] hub 1-0:1.0: USB hub found
[    1.108467] hub 1-0:1.0: 8 ports detected
[    1.108966] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.110693] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.110701] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.110708] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.110964] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    1.111029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.111031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111033] usb usb2: Product: UHCI Host Controller
[    1.111035] usb usb2: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.111036] usb usb2: SerialNumber: 0000:00:1d.0
[    1.111233] hub 2-0:1.0: USB hub found
[    1.111241] hub 2-0:1.0: 2 ports detected
[    1.111496] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.111504] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.111509] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.111527] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    1.111582] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.111584] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111586] usb usb3: Product: UHCI Host Controller
[    1.111588] usb usb3: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.111590] usb usb3: SerialNumber: 0000:00:1d.1
[    1.111782] hub 3-0:1.0: USB hub found
[    1.111791] hub 3-0:1.0: 2 ports detected
[    1.112102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.112108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.112115] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.112140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[    1.112194] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.112196] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112198] usb usb4: Product: UHCI Host Controller
[    1.112199] usb usb4: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.112201] usb usb4: SerialNumber: 0000:00:1d.2
[    1.112399] hub 4-0:1.0: USB hub found
[    1.112407] hub 4-0:1.0: 2 ports detected
[    1.112643] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.112650] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.112655] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.112680] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[    1.112738] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.112740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112742] usb usb5: Product: UHCI Host Controller
[    1.112744] usb usb5: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.112746] usb usb5: SerialNumber: 0000:00:1d.3
[    1.112936] hub 5-0:1.0: USB hub found
[    1.112944] hub 5-0:1.0: 2 ports detected
[    1.113170] ata_piix 0000:00:1f.1: version 2.13
[    1.114477] scsi host0: ata_piix
[    1.114634] scsi host1: ata_piix
[    1.114708] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.114710] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.114824] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.116124] scsi host2: ata_piix
[    1.116248] scsi host3: ata_piix
[    1.116321] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
[    1.116323] ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
[    1.274940] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H20L, 1.00, max UDMA/33
[    1.280640] ata4.00: ATA-11: SanDisk SDSSDH3 500G, 401100RL, max UDMA/133
[    1.280643] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.289324] ata1.00: configured for UDMA/33
[    1.291592] ata3.00: ATA-11: SanDisk SDSSDH3 500G, 401100RL, max UDMA/133
[    1.291595] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.292466] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20L 1.00 PQ: 0 ANSI: 5
[    1.306314] ata3.01: HPA detected: current 312579695, native 312581808
[    1.306321] ata3.01: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
[    1.306324] ata3.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.309730] ata3.00: configured for UDMA/133
[    1.312855] ata3.01: configured for UDMA/133
[    1.313051] scsi 2:0:0:0: Direct-Access    ATA      SanDisk SDSSDH3  00RL PQ: 0 ANSI: 5
[    1.330807] ata4.01: HPA detected: current 156299375, native 156301488
[    1.330812] ata4.01: ATA-7: ST380815AS, 3.AAD, max UDMA/133
[    1.330814] ata4.01: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.334215] ata4.00: configured for UDMA/133
[    1.352389] scsi 2:0:1:0: Direct-Access    ATA      WDC WD1600AAJS-0 6H05 PQ: 0 ANSI: 5
[    1.389116] ata4.01: configured for UDMA/133
[    1.396386] scsi 3:0:0:0: Direct-Access    ATA      SanDisk SDSSDH3  00RL PQ: 0 ANSI: 5
[    1.432381] scsi 3:0:1:0: Direct-Access    ATA      ST380815AS      D    PQ: 0 ANSI: 5
[    1.466816] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.466901] sd 2:0:0:0: [sda] Write Protect is off
[    1.466904] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.466931] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467019] sd 2:0:1:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    1.467084] sd 2:0:1:0: [sdb] Write Protect is off
[    1.467087] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.467221] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467425] sd 3:0:1:0: [sdd] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.467438] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.467554] sd 3:0:1:0: [sdd] Write Protect is off
[    1.467558] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    1.467602] sd 3:0:0:0: [sdc] Write Protect is off
[    1.467605] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.467618] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467663] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.468157]  sda: sda1 sda2
[    1.474104]  sdb: sdb1
[    1.475043] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.475195] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.482767] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.482770] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.483121] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.487262]  sdc: sdc1 sdc2
[    1.487954]  sdd: sdd1
[    1.488727] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.488828] sd 3:0:1:0: [sdd] Attached SCSI disk
[    1.529552] random: fast init done
[    1.632054] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    1.643347] md: bind<sda2>
[    1.660066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2297bf630d0, max_idle_ns: 440795262121 ns
[    1.769475] md: bind<sdc2>
[    1.771901] md: raid1 personality registered for level 1
[    1.772310] md/raid1:md0: active with 2 out of 2 mirrors
[    1.772492] created bitmap (4 pages) for device md0
[    1.772885] md0: bitmap initialized from disk: read 1 pages, set 2 of 7391 bits
[    1.773790] md0: detected capacity change from 0 to 495971205120
[    1.794887] md: linear personality registered for level -1
[    1.796609] md: multipath personality registered for level -4
[    1.798273] md: raid0 personality registered for level 0
[    1.835055] usb 4-2: New USB device found, idVendor=046d, idProduct=c534
[    1.835059] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.835061] usb 4-2: Product: USB Receiver
[    1.835064] usb 4-2: Manufacturer: Logitech
[    1.842838] hidraw: raw HID events driver (C) Jiri Kosina
[    1.849434] usbcore: registered new interface driver usbhid
[    1.849436] usbhid: USB HID core driver
[    1.850618] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C534.0001/input/input3
[    1.904028] raid6: mmxx1    gen()  2866 MB/s
[    1.908263] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    1.909793] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:046D:C534.0002/input/input4
[    1.968392] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    1.972035] raid6: mmxx2    gen()  3277 MB/s
[    2.040063] raid6: sse1x1  gen()  1926 MB/s
[    2.108029] raid6: sse1x2  gen()  2511 MB/s
[    2.109097] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    2.176031] raid6: sse2x1  gen()  3542 MB/s
[    2.244016] raid6: sse2x1  xor()  3786 MB/s
[    2.312026] raid6: sse2x2  gen()  4153 MB/s
[    2.380019] raid6: sse2x2  xor()  4582 MB/s
[    2.380021] raid6: using algorithm sse2x2 gen() 4153 MB/s
[    2.380022] raid6: .... xor() 4582 MB/s, rmw enabled
[    2.380023] raid6: using ssse3x1 recovery algorithm
[    2.380352] xor: measuring software checksum speed
[    2.420018]    pIII_sse  :  7425.000 MB/sec
[    2.460015]    prefetch64-sse:  8372.000 MB/sec
[    2.460016] xor: using function: prefetch64-sse (8372.000 MB/sec)
[    2.460380] async_tx: api initialized (async)
[    2.462330] md: raid6 personality registered for level 6
[    2.462332] md: raid5 personality registered for level 5
[    2.462333] md: raid4 personality registered for level 4
[    2.467633] md: raid10 personality registered for level 10
[    2.485531] PM: Starting manual resume from disk
[    2.485535] PM: Hibernation image partition 8:1 present
[    2.485536] PM: Looking for hibernation image.
[    2.485789] PM: Image not found (code -22)
[    2.485790] PM: Hibernation image not present or could not be loaded.
[    2.640069] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.684232] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[    2.806017] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.839622] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.839818] systemd[1]: Detected architecture x86.
[    2.840089] systemd[1]: Set hostname to <Desktop>.
[    2.957653] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.957735] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.957798] systemd[1]: Listening on udev Control Socket.
[    2.957845] systemd[1]: Listening on udev Kernel Socket.
[    2.957901] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.957970] systemd[1]: Listening on Journal Socket.
[    2.958021] systemd[1]: Listening on RPCbind Server Activation Socket.
[    2.958043] usb 5-2: New USB device found, idVendor=051d, idProduct=0002
[    2.958045] usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.958048] usb 5-2: Product: Back-UPS RS 1500 FW:8.g9a.I USB FW:g9a
[    2.958049] usb 5-2: Manufacturer: American Power Conversion
[    2.958051] usb 5-2: SerialNumber: NB0740008802 
[    3.031238] RPC: Registered named UNIX socket transport module.
[    3.031240] RPC: Registered udp transport module.
[    3.031241] RPC: Registered tcp transport module.
[    3.031241] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.031671] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[    3.076656] lp: driver loaded but no devices found
[    3.079533] ppdev: user-space parallel port driver
[    3.100757] parport_pc 00:04: reported by Plug and Play ACPI
[    3.100848] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.106070] systemd-journald[267]: Received request to flush runtime journal from PID 1
[    3.204177] lp0: using parport0 (interrupt-driven).
[    3.217772] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    3.217777] ACPI: Power Button [PWRB]
[    3.217902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    3.217904] ACPI: Power Button [PWRF]
[    3.267031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.272551] intel_rng: FWH not detected
[    3.307214] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    3.307762] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.308296] sd 2:0:1:0: Attached scsi generic sg2 type 0
[    3.308401] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    3.308480] sd 3:0:1:0: Attached scsi generic sg4 type 0
[    3.308928] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (GP2C) (20160831/utaddress-247)
[    3.308937] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.308983] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.310220] leds_ss4200: no LED devices found
[    3.354897] [drm] Initialized
[    3.355808] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.367195] wmi: Mapper loaded
[    3.399867] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k SSFS
[    3.409196] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.409204] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.425914] coretemp coretemp.0: Using relative temperature scale!
[    3.425937] coretemp coretemp.0: Using relative temperature scale!
[    3.425958] coretemp coretemp.0: Using relative temperature scale!
[    3.425975] coretemp coretemp.0: Using relative temperature scale!
[    3.430226] intel_powerclamp: No package C-state available
[    3.433294] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.433298] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.433300] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.433302] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    3.433304] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    3.433306] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    3.433308] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    3.433310] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    3.433312] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    3.433314] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[    3.433316] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[    3.473288] intel_powerclamp: No package C-state available
[    3.477299] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.478757] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.478856] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.478949] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.479044] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.480165] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[    3.480169] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[    3.565827] Adding 3905532k swap on /dev/sdc1.  Priority:-2 extents:1 across:3905532k SSFS
[    3.618275] nouveau 0000:01:00.0: bios: version 70.18.5f.00.00
[    3.619852] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    3.627135] iTCO_vendor_support: vendor-support=0
[    3.627543] intel_powerclamp: No package C-state available
[    3.628725] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.628767] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[    3.630623] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.671193] [TTM] Zone  kernel: Available graphics memory: 427128 kiB
[    3.671195] [TTM] Zone highmem: Available graphics memory: 2068028 kiB
[    3.671196] [TTM] Initializing pool allocator
[    3.671203] [TTM] Initializing DMA pool allocator
[    3.671224] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    3.671226] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.671235] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    3.671237] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.671244] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[    3.671247] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[    3.671249] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[    3.671251] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[    3.671254] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    3.671256] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[    3.671258] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[    3.721507] random: crng init done
[    3.721509] random: 7 urandom warning(s) missed due to ratelimiting
[    3.774508] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.774510] [drm] Driver supports precise vblank timestamp query.
[    3.784502] intel_powerclamp: No package C-state available
[    3.789372] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.893829] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    4.036315] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo f253b400
[    4.036411] fbcon: nouveaufb (fb0) is primary device
[    4.048186] hid-generic 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9a.I USB FW:g9a] on usb-0000:00:1d.3-2/input0
[    4.083943] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    4.109214] Console: switching to colour frame buffer device 240x67
[    4.112300] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    4.140072] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    4.990446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.028107] r8169 0000:02:01.0 eth0: link down
[    5.028124] r8169 0000:02:01.0 eth0: link down
[    5.028186] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.089798] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    6.089908] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    6.090006] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    6.090104] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    7.794295] r8169 0000:02:01.0 eth0: link up
[    7.794308] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  28.582939] fuse init (API version 7.26)
[  74.494503] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  94.066210] hrtimer: interrupt took 40300532 ns
[  127.863548] perf: interrupt took too long (3148 > 3141), lowering kernel.perf_event_max_sample_rate to 63500
[  329.116132] perf: interrupt took too long (3967 > 3935), lowering kernel.perf_event_max_sample_rate to 50250
[  878.170716] perf: interrupt took too long (4975 > 4958), lowering kernel.perf_event_max_sample_rate to 40000
[ 1453.421924] INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 1.460 msecs
[ 1951.985305] perf: interrupt took too long (6220 > 6218), lowering kernel.perf_event_max_sample_rate to 32000
[11245.634226] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 2.104 msecs
[11245.634226] perf: interrupt took too long (21975 > 7775), lowering kernel.perf_event_max_sample_rate to 9000
[17342.168017] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 10.185 msecs
[17342.168017] perf: interrupt took too long (85726 > 27468), lowering kernel.perf_event_max_sample_rate to 2250


[/size]

 

[LoneMarvel]

τελευταια αλλαγη στο hardware ηταν το καλοκαιρι που εβαλα τους δισκους

και που τρεχω dmesg δεν βγαζω ακρη 


για δες το σεντονακι 

[size=6pt]
[    0.000000] Linux version 4.9.0-11-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.189-3+deb9u1 (2019-09-20)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G41M-ES2L/G41M-ES2L, BIOS F6 11/04/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]  00000-9FFFF write-back
[    0.000000]  A0000-BFFFF uncachable
[    0.000000]  C0000-CDFFF write-protect
[    0.000000]  CE000-EFFFF uncachable
[    0.000000]  F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]  0 base 000000000 mask F00000000 write-back
[    0.000000]  1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]  2 base 100000000 mask FC0000000 write-back
[    0.000000]  3 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]  4 disabled
[    0.000000]  5 disabled
[    0.000000]  6 disabled
[    0.000000]  7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000f5340-0x000f534f] mapped at [c00f5340]
[    0.000000] initial memory mapped: [mem 0x00000000-0x13dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x139f6000, 0x139f6fff] PGTABLE
[    0.000000] BRK [0x139f7000, 0x139f8fff] PGTABLE
[    0.000000] BRK [0x139f9000, 0x139f9fff] PGTABLE
[    0.000000] BRK [0x139fa000, 0x139fafff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35d15000-0x36e81fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6D40 000014 (v00 GBT  )
[    0.000000] ACPI: RSDT 0x00000000BFEE3040 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000BFEE3180 0043B3 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000BFEE7680 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEE7700 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000BFEE7740 00644A (v01 GBT    GBT  B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 0x00000000BFEE7580 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000BFEEE4B0 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4230MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]  mapped low ram: 0 - 379fe000
[    0.000000]  low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]  Normal  [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]  HighMem  [mem 0x00000000379fe000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]  node  0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]  node  0: [mem 0x0000000000100000-0x00000000bfedffff]
[    0.000000]  node  0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048190
[    0.000000] free_area_init_node: node 0, pgdat d3805c40, node_mem_map f3015024
[    0.000000]  DMA zone: 36 pages used for memmap
[    0.000000]  DMA zone: 0 pages reserved
[    0.000000]  DMA zone: 3998 pages, LIFO batch:0
[    0.000000]  Normal zone: 1967 pages used for memmap
[    0.000000]  Normal zone: 223742 pages, LIFO batch:31
[    0.000000]  HighMem zone: 820450 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu s50828 r0 d31092 u81920
[    0.000000] pcpu-alloc: s50828 r0 d31092 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1046187
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-11-686-pae root=UUID=40cd7ef0-053c-4906-b24c-6dcc0d216640 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4117424K/4192760K available (5927K kernel code, 660K rwdata, 1728K rodata, 764K init, 440K bss, 75336K reserved, 0K cma-reserved, 3281800K highmem)
[    0.000000] virtual kernel memory layout:
                  fixmap  : 0xffd36000 - 0xfffff000  (2852 kB)
                  pkmap  : 0xffa00000 - 0xffc00000  (2048 kB)
                  vmalloc : 0xf81fe000 - 0xff9fe000  ( 120 MB)
                  lowmem  : 0xc0000000 - 0xf79fe000  ( 889 MB)
                    .init : 0xd3823000 - 0xd38e2000  ( 764 kB)
                    .data : 0xd35ca1d4 - 0xd3821180  (2395 kB)
                    .text : 0xd3000000 - 0xd35ca1d4  (5928 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2399.873 MHz processor
[    0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.74 BogoMIPS (lpj=9599492)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004039] ACPI: Core revision 20160831
[    0.007325] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.007370] Security Framework initialized
[    0.007372] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.007380] AppArmor: AppArmor disabled by boot time parameter
[    0.007398] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007400] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008149] mce: CPU supports 6 MCE banks
[    0.008156] CPU0: Thermal monitoring enabled (TM2)
[    0.008160] process: using mwait in idle threads
[    0.008168] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.008169] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.008171] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.008172] Spectre V2 : Mitigation: Full generic retpoline
[    0.008173] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.008174] Speculative Store Bypass: Vulnerable
[    0.008204] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.008463] Freeing SMP alternatives memory: 24K
[    0.011047] ftrace: allocating 24172 entries in 48 pages
[    0.028085] smpboot: Max logical packages: 1
[    0.028092] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
[    0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.068000] core: PEBS disabled due to CPU errata
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:            000000ffffffffff
[    0.068000] ... max period:            000000007fffffff
[    0.068000] ... fixed-purpose events:  3
[    0.068000] ... event mask:            0000000700000003
[    0.068000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.068000] CPU 1 irqstacks, hard=f75a6000 soft=f75a8000
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.068000] CPU 2 irqstacks, hard=f75dc000 soft=f75de000
[    0.068000]  #2
[    0.008000] Initializing CPU#2
[    0.070279] CPU 3 irqstacks, hard=f7614000 soft=f7616000
[    0.070279]  #3
[    0.008000] Initializing CPU#3
[    0.072032] x86: Booted up 1 node, 4 CPUs
[    0.072032] smpboot: Total of 4 processors activated (19198.98 BogoMIPS)
[    0.076289] devtmpfs: initialized
[    0.076344] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.076344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.076344] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.076344] pinctrl core: initialized pinctrl subsystem
[    0.076445] NET: Registered protocol family 16
[    0.088008] cpuidle: using governor ladder
[    0.104007] cpuidle: using governor menu
[    0.104071] ACPI: bus type PCI registered
[    0.104075] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.104176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.104179] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.104179] PCI: Using MMCONFIG for extended config space
[    0.104180] PCI: Using configuration type 1 for base access
[    0.120062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.120108] ACPI: Added _OSI(Module Device)
[    0.120110] ACPI: Added _OSI(Processor Device)
[    0.120111] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120112] ACPI: Added _OSI(Processor Aggregator Device)
[    0.123738] ACPI: Dynamic OEM Table Load:
[    0.123744] ACPI: SSDT 0x00000000F7635C00 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.123974] ACPI: Dynamic OEM Table Load:
[    0.123979] ACPI: SSDT 0x00000000F7620200 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.124193] ACPI: Dynamic OEM Table Load:
[    0.124198] ACPI: SSDT 0x00000000F76B2000 000152 (v01 PmRef  Cpu2Ist  00003000 INTL 20040311)
[    0.124403] ACPI: Dynamic OEM Table Load:
[    0.124408] ACPI: SSDT 0x00000000F76B2400 000152 (v01 PmRef  Cpu3Ist  00003000 INTL 20040311)
[    0.124831] ACPI: Interpreter enabled
[    0.124870] ACPI: (supports S0 S3 S4 S5)
[    0.124871] ACPI: Using IOAPIC for interrupt routing
[    0.124906] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131118] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.131123] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.131129] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.131438] PCI host bridge to bus 0000:00
[    0.131441] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.131443] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.131445] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.131447] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.131449] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[    0.131451] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.131462] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.131601] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[    0.131646] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.131788] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.131806] pci 0000:00:1b.0: reg 0x10: [mem 0xf5000000-0xf5003fff 64bit]
[    0.131879] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.131951] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.132015] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.132055] pci 0000:00:1d.0: reg 0x20: [io  0xe300-0xe31f]
[    0.132141] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.132201] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.132241] pci 0000:00:1d.1: reg 0x20: [io  0xe000-0xe01f]
[    0.132327] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.132385] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.132424] pci 0000:00:1d.2: reg 0x20: [io  0xe100-0xe11f]
[    0.132509] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.132569] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.132609] pci 0000:00:1d.3: reg 0x20: [io  0xe200-0xe21f]
[    0.132695] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.132760] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.132776] pci 0000:00:1d.7: reg 0x10: [mem 0xf5004000-0xf50043ff]
[    0.132913] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.132974] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.133083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.133145] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.133224] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.133229] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.133233] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.133236] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.133374] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.133387] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.133396] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.133405] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.133413] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.133422] pci 0000:00:1f.1: reg 0x20: [io  0xf000-0xf00f]
[    0.133442] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.133443] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.133445] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.133447] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.133568] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.133581] pci 0000:00:1f.2: reg 0x10: [io  0xe800-0xe807]
[    0.133589] pci 0000:00:1f.2: reg 0x14: [io  0xe900-0xe903]
[    0.133597] pci 0000:00:1f.2: reg 0x18: [io  0xea00-0xea07]
[    0.133605] pci 0000:00:1f.2: reg 0x1c: [io  0xeb00-0xeb03]
[    0.133613] pci 0000:00:1f.2: reg 0x20: [io  0xec00-0xec0f]
[    0.133650] pci 0000:00:1f.2: PME# supported from D3hot
[    0.133768] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.133819] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.134006] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[    0.134021] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.134033] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.134046] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.134054] pci 0000:01:00.0: reg 0x24: [io  0xc000-0xc07f]
[    0.134063] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.134184] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.134198] pci 0000:01:00.1: reg 0x10: [mem 0xf2000000-0xf2003fff]
[    0.134357] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.134360] pci 0000:00:01.0:  bridge window [io  0xc000-0xcfff]
[    0.134363] pci 0000:00:01.0:  bridge window [mem 0xf0000000-0xf2ffffff]
[    0.134367] pci 0000:00:01.0:  bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.134421] pci 0000:02:01.0: [10ec:8169] type 00 class 0x020000
[    0.134438] pci 0000:02:01.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.134448] pci 0000:02:01.0: reg 0x14: [mem 0xf4000000-0xf40000ff]
[    0.134490] pci 0000:02:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.134522] pci 0000:02:01.0: supports D1 D2
[    0.134524] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.134624] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.134627] pci 0000:00:1e.0:  bridge window [io  0xd000-0xdfff]
[    0.134631] pci 0000:00:1e.0:  bridge window [mem 0xf3000000-0xf4ffffff]
[    0.134647] pci 0000:00:1e.0:  bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.134649] pci 0000:00:1e.0:  bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.134651] pci 0000:00:1e.0:  bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.134653] pci 0000:00:1e.0:  bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.134655] pci 0000:00:1e.0:  bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[    0.134665] pci_bus 0000:00: on NUMA node 0
[    0.135492] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.135572] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.135649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[    0.135727] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.135804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.135882] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.135959] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.136043] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.136185] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.136308] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.136308] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.136308] vgaarb: loaded
[    0.136308] vgaarb: bridge control possible 0000:01:00.0
[    0.136308] PCI: Using ACPI for IRQ routing
[    0.142464] PCI: pci_cache_line_size set to 64 bytes
[    0.142505] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.142507] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[    0.142678] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.142678] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.142678] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.144027] clocksource: Switched to clocksource hpet
[    0.154243] VFS: Disk quotas dquot_6.6.0
[    0.154281] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.154404] pnp: PnP ACPI init
[    0.154629] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.154632] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.154634] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.154637] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.154639] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.154644] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.154743] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.155089] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.155363] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.155636] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.155782] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.155842] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.155933] system 00:07: [io  0x0400-0x04cf] could not be reserved
[    0.155937] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156228] system 00:08: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.156232] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156486] system 00:09: [mem 0x000ce600-0x000cffff] has been reserved
[    0.156489] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.156491] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.156493] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.156496] system 00:09: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.156498] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.156501] system 00:09: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.156503] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.156506] system 00:09: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.156508] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.156510] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.156513] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.156515] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.156518] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[    0.156521] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.156528] pnp: PnP ACPI: found 10 devices
[    0.156533] PnPBIOS: Disabled
[    0.195253] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.195279] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[    0.195282] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.195284] pci 0000:00:01.0:  bridge window [io  0xc000-0xcfff]
[    0.195288] pci 0000:00:01.0:  bridge window [mem 0xf0000000-0xf2ffffff]
[    0.195291] pci 0000:00:01.0:  bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.195297] pci 0000:02:01.0: BAR 6: assigned [mem 0xf3000000-0xf301ffff pref]
[    0.195299] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.195302] pci 0000:00:1e.0:  bridge window [io  0xd000-0xdfff]
[    0.195306] pci 0000:00:1e.0:  bridge window [mem 0xf3000000-0xf4ffffff]
[    0.195315] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.195317] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.195319] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.195321] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.195323] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.195325] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.195327] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
[    0.195329] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[    0.195331] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.195333] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf4ffffff]
[    0.195335] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.195337] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.195339] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.195341] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.195343] pci_bus 0000:02: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.195489] NET: Registered protocol family 2
[    0.195732] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.195746] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.195768] TCP: Hash tables configured (established 8192 bind 8192)
[    0.195791] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.195798] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.195856] NET: Registered protocol family 1
[    0.216193] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.216205] PCI: CLS 32 bytes, default 64
[    0.216265] Unpacking initramfs...
[    0.629958] Freeing initrd memory: 17844K
[    0.630672] audit: initializing netlink subsys (disabled)
[    0.630696] audit: type=2000 audit(1579857511.628:1): initialized
[    0.631221] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.631311] zbud: loaded
[    0.632493] bounce: pool size: 64 pages
[    0.632526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.632579] io scheduler noop registered
[    0.632581] io scheduler deadline registered
[    0.632610] io scheduler cfq registered (default)
[    0.632964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.632972] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.632993] intel_idle: does not run on family 6 model 15
[    0.633012] tsc: Marking TSC unstable due to TSC halts in idle
[    0.633516] GHES: HEST is not enabled!
[    0.633597] isapnp: Scanning for PnP cards...
[    0.986707] isapnp: No Plug & Play device found
[    0.986792] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.007231] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.027708] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.028233] Linux agpgart interface v0.103
[    1.028970] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[    1.029445] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.029452] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.029706] mousedev: PS/2 mouse device common for all mice
[    1.029773] rtc_cmos 00:01: RTC can wake from S4
[    1.029908] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.029931] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.030028] ledtrig-cpu: registered to indicate activity on CPUs
[    1.030604] NET: Registered protocol family 10
[    1.030934] mip6: Mobile IPv6
[    1.030937] NET: Registered protocol family 17
[    1.030940] mpls_gso: MPLS GSO support
[    1.031274] microcode: sig=0x6fb, pf=0x10, revision=0xb6
[    1.031384] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.031388] Using IPI No-Shortcut mode
[    1.031638] registered taskstats version 1
[    1.031661] zswap: loaded using pool lzo/zbud
[    1.031820] ima: No TPM chip found, activating TPM-bypass!
[    1.031822] ima: Allocated hash algorithm: sha256
[    1.032105] rtc_cmos 00:01: setting system clock to 2020-01-24 09:18:32 UTC (1579857512)
[    1.032163] PM: Hibernation image not present or could not be loaded.
[    1.032526] Freeing unused kernel memory: 764K
[    1.032619] Write protecting the kernel text: 5932k
[    1.032708] Write protecting the kernel read-only data: 1732k
[    1.032709] NX-protecting the kernel data: 4308k
[    1.032925] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.051202] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.051314] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.051335] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.066530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.087695] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.087824] r8169 0000:02:01.0 (unnamed net_device) (uninitialized): not PCI Express
[    1.088219] r8169 0000:02:01.0 eth0: RTL8169sb/8110sb at 0xf820e000, 10:fe:ed:05:80:34, XID 10000000 IRQ 19
[    1.088222] r8169 0000:02:01.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    1.088540] ACPI: bus type USB registered
[    1.088575] usbcore: registered new interface driver usbfs
[    1.088592] usbcore: registered new interface driver hub
[    1.088630] usbcore: registered new device driver usb
[    1.089524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.090009] ehci-pci: EHCI PCI platform driver
[    1.090198] uhci_hcd: USB Universal Host Controller Interface driver
[    1.090238] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.090248] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.091682] SCSI subsystem initialized
[    1.093862] libata version 3.00 loaded.
[    1.094175] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.094372] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf5004000
[    1.108169] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.108251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.108253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.108255] usb usb1: Product: EHCI Host Controller
[    1.108257] usb usb1: Manufacturer: Linux 4.9.0-11-686-pae ehci_hcd
[    1.108259] usb usb1: SerialNumber: 0000:00:1d.7
[    1.108458] hub 1-0:1.0: USB hub found
[    1.108467] hub 1-0:1.0: 8 ports detected
[    1.108966] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.110693] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.110701] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.110708] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.110964] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    1.111029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.111031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111033] usb usb2: Product: UHCI Host Controller
[    1.111035] usb usb2: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.111036] usb usb2: SerialNumber: 0000:00:1d.0
[    1.111233] hub 2-0:1.0: USB hub found
[    1.111241] hub 2-0:1.0: 2 ports detected
[    1.111496] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.111504] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.111509] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.111527] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[    1.111582] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.111584] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111586] usb usb3: Product: UHCI Host Controller
[    1.111588] usb usb3: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.111590] usb usb3: SerialNumber: 0000:00:1d.1
[    1.111782] hub 3-0:1.0: USB hub found
[    1.111791] hub 3-0:1.0: 2 ports detected
[    1.112102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.112108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.112115] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.112140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e100
[    1.112194] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.112196] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112198] usb usb4: Product: UHCI Host Controller
[    1.112199] usb usb4: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.112201] usb usb4: SerialNumber: 0000:00:1d.2
[    1.112399] hub 4-0:1.0: USB hub found
[    1.112407] hub 4-0:1.0: 2 ports detected
[    1.112643] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.112650] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.112655] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.112680] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
[    1.112738] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.112740] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.112742] usb usb5: Product: UHCI Host Controller
[    1.112744] usb usb5: Manufacturer: Linux 4.9.0-11-686-pae uhci_hcd
[    1.112746] usb usb5: SerialNumber: 0000:00:1d.3
[    1.112936] hub 5-0:1.0: USB hub found
[    1.112944] hub 5-0:1.0: 2 ports detected
[    1.113170] ata_piix 0000:00:1f.1: version 2.13
[    1.114477] scsi host0: ata_piix
[    1.114634] scsi host1: ata_piix
[    1.114708] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.114710] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.114824] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.116124] scsi host2: ata_piix
[    1.116248] scsi host3: ata_piix
[    1.116321] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
[    1.116323] ata4: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
[    1.274940] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H20L, 1.00, max UDMA/33
[    1.280640] ata4.00: ATA-11: SanDisk SDSSDH3 500G, 401100RL, max UDMA/133
[    1.280643] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.289324] ata1.00: configured for UDMA/33
[    1.291592] ata3.00: ATA-11: SanDisk SDSSDH3 500G, 401100RL, max UDMA/133
[    1.291595] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.292466] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H20L 1.00 PQ: 0 ANSI: 5
[    1.306314] ata3.01: HPA detected: current 312579695, native 312581808
[    1.306321] ata3.01: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
[    1.306324] ata3.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.309730] ata3.00: configured for UDMA/133
[    1.312855] ata3.01: configured for UDMA/133
[    1.313051] scsi 2:0:0:0: Direct-Access    ATA      SanDisk SDSSDH3  00RL PQ: 0 ANSI: 5
[    1.330807] ata4.01: HPA detected: current 156299375, native 156301488
[    1.330812] ata4.01: ATA-7: ST380815AS, 3.AAD, max UDMA/133
[    1.330814] ata4.01: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.334215] ata4.00: configured for UDMA/133
[    1.352389] scsi 2:0:1:0: Direct-Access    ATA      WDC WD1600AAJS-0 6H05 PQ: 0 ANSI: 5
[    1.389116] ata4.01: configured for UDMA/133
[    1.396386] scsi 3:0:0:0: Direct-Access    ATA      SanDisk SDSSDH3  00RL PQ: 0 ANSI: 5
[    1.432381] scsi 3:0:1:0: Direct-Access    ATA      ST380815AS      D    PQ: 0 ANSI: 5
[    1.466816] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.466901] sd 2:0:0:0: [sda] Write Protect is off
[    1.466904] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.466931] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467019] sd 2:0:1:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[    1.467084] sd 2:0:1:0: [sdb] Write Protect is off
[    1.467087] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.467221] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467425] sd 3:0:1:0: [sdd] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.467438] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.467554] sd 3:0:1:0: [sdd] Write Protect is off
[    1.467558] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    1.467602] sd 3:0:0:0: [sdc] Write Protect is off
[    1.467605] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.467618] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467663] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.468157]  sda: sda1 sda2
[    1.474104]  sdb: sdb1
[    1.475043] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.475195] sd 2:0:1:0: [sdb] Attached SCSI disk
[    1.482767] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.482770] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.483121] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.487262]  sdc: sdc1 sdc2
[    1.487954]  sdd: sdd1
[    1.488727] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.488828] sd 3:0:1:0: [sdd] Attached SCSI disk
[    1.529552] random: fast init done
[    1.632054] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    1.643347] md: bind<sda2>
[    1.660066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2297bf630d0, max_idle_ns: 440795262121 ns
[    1.769475] md: bind<sdc2>
[    1.771901] md: raid1 personality registered for level 1
[    1.772310] md/raid1:md0: active with 2 out of 2 mirrors
[    1.772492] created bitmap (4 pages) for device md0
[    1.772885] md0: bitmap initialized from disk: read 1 pages, set 2 of 7391 bits
[    1.773790] md0: detected capacity change from 0 to 495971205120
[    1.794887] md: linear personality registered for level -1
[    1.796609] md: multipath personality registered for level -4
[    1.798273] md: raid0 personality registered for level 0
[    1.835055] usb 4-2: New USB device found, idVendor=046d, idProduct=c534
[    1.835059] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.835061] usb 4-2: Product: USB Receiver
[    1.835064] usb 4-2: Manufacturer: Logitech
[    1.842838] hidraw: raw HID events driver (C) Jiri Kosina
[    1.849434] usbcore: registered new interface driver usbhid
[    1.849436] usbhid: USB HID core driver
[    1.850618] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C534.0001/input/input3
[    1.904028] raid6: mmxx1    gen()  2866 MB/s
[    1.908263] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
[    1.909793] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:046D:C534.0002/input/input4
[    1.968392] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
[    1.972035] raid6: mmxx2    gen()  3277 MB/s
[    2.040063] raid6: sse1x1  gen()  1926 MB/s
[    2.108029] raid6: sse1x2  gen()  2511 MB/s
[    2.109097] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    2.176031] raid6: sse2x1  gen()  3542 MB/s
[    2.244016] raid6: sse2x1  xor()  3786 MB/s
[    2.312026] raid6: sse2x2  gen()  4153 MB/s
[    2.380019] raid6: sse2x2  xor()  4582 MB/s
[    2.380021] raid6: using algorithm sse2x2 gen() 4153 MB/s
[    2.380022] raid6: .... xor() 4582 MB/s, rmw enabled
[    2.380023] raid6: using ssse3x1 recovery algorithm
[    2.380352] xor: measuring software checksum speed
[    2.420018]    pIII_sse  :  7425.000 MB/sec
[    2.460015]    prefetch64-sse:  8372.000 MB/sec
[    2.460016] xor: using function: prefetch64-sse (8372.000 MB/sec)
[    2.460380] async_tx: api initialized (async)
[    2.462330] md: raid6 personality registered for level 6
[    2.462332] md: raid5 personality registered for level 5
[    2.462333] md: raid4 personality registered for level 4
[    2.467633] md: raid10 personality registered for level 10
[    2.485531] PM: Starting manual resume from disk
[    2.485535] PM: Hibernation image partition 8:1 present
[    2.485536] PM: Looking for hibernation image.
[    2.485789] PM: Image not found (code -22)
[    2.485790] PM: Hibernation image not present or could not be loaded.
[    2.640069] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.684232] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[    2.806017] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.839622] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.839818] systemd[1]: Detected architecture x86.
[    2.840089] systemd[1]: Set hostname to <Desktop>.
[    2.957653] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.957735] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.957798] systemd[1]: Listening on udev Control Socket.
[    2.957845] systemd[1]: Listening on udev Kernel Socket.
[    2.957901] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.957970] systemd[1]: Listening on Journal Socket.
[    2.958021] systemd[1]: Listening on RPCbind Server Activation Socket.
[    2.958043] usb 5-2: New USB device found, idVendor=051d, idProduct=0002
[    2.958045] usb 5-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.958048] usb 5-2: Product: Back-UPS RS 1500 FW:8.g9a.I USB FW:g9a
[    2.958049] usb 5-2: Manufacturer: American Power Conversion
[    2.958051] usb 5-2: SerialNumber: NB0740008802 
[    3.031238] RPC: Registered named UNIX socket transport module.
[    3.031240] RPC: Registered udp transport module.
[    3.031241] RPC: Registered tcp transport module.
[    3.031241] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.031671] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[    3.076656] lp: driver loaded but no devices found
[    3.079533] ppdev: user-space parallel port driver
[    3.100757] parport_pc 00:04: reported by Plug and Play ACPI
[    3.100848] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.106070] systemd-journald[267]: Received request to flush runtime journal from PID 1
[    3.204177] lp0: using parport0 (interrupt-driven).
[    3.217772] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    3.217777] ACPI: Power Button [PWRB]
[    3.217902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    3.217904] ACPI: Power Button [PWRF]
[    3.267031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.272551] intel_rng: FWH not detected
[    3.307214] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    3.307762] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.308296] sd 2:0:1:0: Attached scsi generic sg2 type 0
[    3.308401] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    3.308480] sd 3:0:1:0: Attached scsi generic sg4 type 0
[    3.308928] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (GP2C) (20160831/utaddress-247)
[    3.308937] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.308983] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.310220] leds_ss4200: no LED devices found
[    3.354897] [drm] Initialized
[    3.355808] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.367195] wmi: Mapper loaded
[    3.399867] Adding 3905532k swap on /dev/sda1.  Priority:-1 extents:1 across:3905532k SSFS
[    3.409196] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.409204] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.425914] coretemp coretemp.0: Using relative temperature scale!
[    3.425937] coretemp coretemp.0: Using relative temperature scale!
[    3.425958] coretemp coretemp.0: Using relative temperature scale!
[    3.425975] coretemp coretemp.0: Using relative temperature scale!
[    3.430226] intel_powerclamp: No package C-state available
[    3.433294] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.433298] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.433300] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.433302] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    3.433304] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    3.433306] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    3.433308] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    3.433310] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    3.433312] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    3.433314] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[    3.433316] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[    3.473288] intel_powerclamp: No package C-state available
[    3.477299] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.478757] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.478856] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.478949] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.479044] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.480165] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[    3.480169] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[    3.565827] Adding 3905532k swap on /dev/sdc1.  Priority:-2 extents:1 across:3905532k SSFS
[    3.618275] nouveau 0000:01:00.0: bios: version 70.18.5f.00.00
[    3.619852] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    3.627135] iTCO_vendor_support: vendor-support=0
[    3.627543] intel_powerclamp: No package C-state available
[    3.628725] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.628767] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[    3.630623] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.671193] [TTM] Zone  kernel: Available graphics memory: 427128 kiB
[    3.671195] [TTM] Zone highmem: Available graphics memory: 2068028 kiB
[    3.671196] [TTM] Initializing pool allocator
[    3.671203] [TTM] Initializing DMA pool allocator
[    3.671224] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    3.671226] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    3.671235] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    3.671237] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    3.671244] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[    3.671247] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[    3.671249] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[    3.671251] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[    3.671254] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    3.671256] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[    3.671258] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[    3.721507] random: crng init done
[    3.721509] random: 7 urandom warning(s) missed due to ratelimiting
[    3.774508] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.774510] [drm] Driver supports precise vblank timestamp query.
[    3.784502] intel_powerclamp: No package C-state available
[    3.789372] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.893829] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    4.036315] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo f253b400
[    4.036411] fbcon: nouveaufb (fb0) is primary device
[    4.048186] hid-generic 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9a.I USB FW:g9a] on usb-0000:00:1d.3-2/input0
[    4.083943] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[    4.109214] Console: switching to colour frame buffer device 240x67
[    4.112300] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    4.140072] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    4.990446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.028107] r8169 0000:02:01.0 eth0: link down
[    5.028124] r8169 0000:02:01.0 eth0: link down
[    5.028186] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.089798] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    6.089908] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    6.090006] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    6.090104] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    7.794295] r8169 0000:02:01.0 eth0: link up
[    7.794308] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  28.582939] fuse init (API version 7.26)
[  74.494503] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  94.066210] hrtimer: interrupt took 40300532 ns
[  127.863548] perf: interrupt took too long (3148 > 3141), lowering kernel.perf_event_max_sample_rate to 63500
[  329.116132] perf: interrupt took too long (3967 > 3935), lowering kernel.perf_event_max_sample_rate to 50250
[  878.170716] perf: interrupt took too long (4975 > 4958), lowering kernel.perf_event_max_sample_rate to 40000
[ 1453.421924] INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 1.460 msecs
[ 1951.985305] perf: interrupt took too long (6220 > 6218), lowering kernel.perf_event_max_sample_rate to 32000
[11245.634226] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 2.104 msecs
[11245.634226] perf: interrupt took too long (21975 > 7775), lowering kernel.perf_event_max_sample_rate to 9000
[17342.168017] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 10.185 msecs
[17342.168017] perf: interrupt took too long (85726 > 27468), lowering kernel.perf_event_max_sample_rate to 2250


[/size]

Για δοκίμασε και την παρακάτω -> journalctl -x | grep -i error | grep -i jan 24

 

[LoneMarvel]

Στο σεντόνι που ποστάρισες το μόνο error που βρίσκω είναι αυτό ->
cat tmp-dmesg.txt | grep -i error
[    3.031671] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
Αλλά δεν είναι κάτι.

 

[AntonisAnt2]

Για δοκίμασε και την παρακάτω -> journalctl -x | grep -i error | grep -i jan 24

αυτη τη φορα δεν βγηκε σεντονακι 


Jan 24 11:18:34 Desktop kernel: EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
Jan 24 11:18:52 Desktop gnome-shell[1059]: JS ERROR: could not get remote objects for service org.gnome.SettingsDaemon.Smartcard path /org/gnome/SettingsDaemon/Smartcard: Gio.DBusError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SettingsDaemon.Smartcard was not provided by any .service files
Jan 24 11:18:53 Desktop gnome-settings-[1125]: g_task_return_error: assertion 'error != NULL' failed
Jan 24 11:18:57 Desktop /usr/lib/gdm3/gdm-x-session[1165]:        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Jan 24 11:19:05 Desktop /usr/lib/gdm3/gdm-x-session[1165]: Errors from xkbcomp are not fatal to the X server
Jan 24 11:19:07 Desktop gnome-settings-[1370]: g_task_return_error: assertion 'error != NULL' failed
Jan 24 11:19:16 Desktop pulseaudio[1284]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
Jan 24 11:19:16 Desktop pulseaudio[1109]: E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:55:09 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (50): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 14:36:35 Desktop firefox-esr.desktop[1579]: ###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv
Jan 24 14:36:35 Desktop firefox-esr.desktop[1579]: ###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv
Jan 24 15:16:46 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (120): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 15:29:35 Desktop gvfsd-network[3803]: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Operation not supported by backend
Jan 24 15:29:59 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (197): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 15:51:40 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (130): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 16:06:35 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (195): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 18:06:14 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (133): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 19:58:15 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (134): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 21:09:48 Desktop gnome-shell[1257]: Failed to set the markup of the actor 'ClutterText': Error on line 1: Entity did not end with a semicolon; most likely you used an ampersand character without intending to start an entity - escape ampersand as &
Jan 24 21:09:49 Desktop gnome-shell[1257]: JS LOG: Received error from DBus search provider org.gnome.Photos.desktop during GetResultMetas: Gio.DBusError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name :1.142 was not provided by any .service files

 

[LoneMarvel]

αυτη τη φορα δεν βγηκε σεντονακι  


Jan 24 11:18:34 Desktop kernel: EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
Jan 24 11:18:52 Desktop gnome-shell[1059]: JS ERROR: could not get remote objects for service org.gnome.SettingsDaemon.Smartcard path /org/gnome/SettingsDaemon/Smartcard: Gio.DBusError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SettingsDaemon.Smartcard was not provided by any .service files
Jan 24 11:18:53 Desktop gnome-settings-[1125]: g_task_return_error: assertion 'error != NULL' failed
Jan 24 11:18:57 Desktop /usr/lib/gdm3/gdm-x-session[1165]:         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Jan 24 11:19:05 Desktop /usr/lib/gdm3/gdm-x-session[1165]: Errors from xkbcomp are not fatal to the X server
Jan 24 11:19:07 Desktop gnome-settings-[1370]: g_task_return_error: assertion 'error != NULL' failed
Jan 24 11:19:16 Desktop pulseaudio[1284]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
Jan 24 11:19:16 Desktop pulseaudio[1109]: E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:20:01 Desktop tracker-extract[1410]: If the error above is recurrent for the same item/ID, consider running "tracker-extract" in the terminal with the TRACKER_VERBOSITY=3 environment variable, and filing a bug with the additional information
Jan 24 11:55:09 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (50): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 14:36:35 Desktop firefox-esr.desktop[1579]: ###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv
Jan 24 14:36:35 Desktop firefox-esr.desktop[1579]: ###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv
Jan 24 15:16:46 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (120): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 15:29:35 Desktop gvfsd-network[3803]: Couldn't create directory monitor on smb://x-gnome-default-workgroup/. Error: Operation not supported by backend
Jan 24 15:29:59 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (197): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 15:51:40 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (130): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 16:06:35 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (195): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 18:06:14 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (133): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 19:58:15 Desktop firefox-esr.desktop[1579]: [Parent 1579, Gecko_IOThread] WARNING: pipe error (134): Connection reset by peer: file /build/firefox-esr-kScvWh/firefox-esr-60.9.0esr/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 342
Jan 24 21:09:48 Desktop gnome-shell[1257]: Failed to set the markup of the actor 'ClutterText': Error on line 1: Entity did not end with a semicolon; most likely you used an ampersand character without intending to start an entity - escape ampersand as &
Jan 24 21:09:49 Desktop gnome-shell[1257]: JS LOG: Received error from DBus search provider org.gnome.Photos.desktop during GetResultMetas: Gio.DBusError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name :1.142 was not provided by any .service files

Μπορεί να έχεις κάποιο θέμα στο Graphical Interface που σηκώνει μετά
- Κάνε ένα apt-get update και μετά apt-get upgrade
- Ξεκίνα το PC κανονικά με power on και όταν φτάσει στο Grub πάτα το πλήκτρο e και στην γραμμή που λεει linux /boot/vmlinuz-x.xx root=UUID κλπ στο τέλος πρόσθεσε -> ro quiet systemd.unit=rescue.taret
Θα μπεί σε single mode εαν μπεί εκει σημαίνει ότι πρέπει να ψάξουμε το interface που σηκώνει μετα.

 

[AntonisAnt2]

Μπορεί να έχεις κάποιο θέμα στο Graphical Interface που σηκώνει μετά
- Κάνε ένα apt-get update και μετά apt-get upgrade
- Ξεκίνα το PC κανονικά με power on και όταν φτάσει στο Grub πάτα το πλήκτρο e και στην γραμμή που λεει linux /boot/vmlinuz-x.xx root=UUID κλπ στο τέλος πρόσθεσε -> ro quiet systemd.unit=rescue.taret
Θα μπεί σε single mode εαν μπεί εκει σημαίνει ότι πρέπει να ψάξουμε το interface που σηκώνει μετα.

ok - ευχαριστω - καποια στιγμη αργοτερα θα σου πω τα αποτελεσματα

 

[jeik]

Στο desktop εχω ιντερνετ αλλα εχω προβλημα με το windows update και το i tunes.Μπορει καποιος να βοηθησει?

 

[LoneMarvel]

Ιντερνετ εχω αλλα εχω προβλημα με το windows update και το i tunes.Μπορει καποιος να βοηθησει?

Δεν συνδέεται και δεν κάνει update;
Τι σύνδεση έχεις καλώδιο ή ασύρματο δίκτυο;

 

[jeik]

Ναι δεν συνδεεταικαι δεν κατεβαζει τα updates
Ασυρματο με ενα usb belkin

 

[LoneMarvel]

Ναι δεν συνδεεταικαι δεν κατεβαζει τα updates
Ασυρματο με ενα usb belkin

Την σελιδα της microsoft μπορείς να την ανοίξεις;
Εαν μπορείς δοκίμασε και με ένα καλώδιο πολλή πιθανόν να θέλουν αναβαθμισει οι οδηγοί της ασύρματης κάρτας δικτυου ή εαν έγινε αυτό τελευταία και μετά δημιουργήθηκε το πρόβλημα να χρειάζεται να επαναφέρεις την προηγούμενη έκδοση των οδηγών

 

[AntonisAnt2]

Μπορεί να έχεις κάποιο θέμα στο Graphical Interface που σηκώνει μετά
- Κάνε ένα apt-get update και μετά apt-get upgrade
- Ξεκίνα το PC κανονικά με power on και όταν φτάσει στο Grub πάτα το πλήκτρο e και στην γραμμή που λεει linux /boot/vmlinuz-x.xx root=UUID κλπ στο τέλος πρόσθεσε -> ro quiet systemd.unit=rescue.taret
Θα μπεί σε single mode εαν μπεί εκει σημαίνει ότι πρέπει να ψάξουμε το interface που σηκώνει μετα.

μια χαρα ξεκιναει ετσι, χωρις κανενα προβλημα

 

[LoneMarvel]

μια χαρα ξεκιναει ετσι, χωρις κανενα προβλημα

Καλημέρα,
Ωραία έχεις εκτος πληκτρολογίου και ποντικιού logitech μάλον άλλη USB συσκευή;
Από ότι είδα έχεις κάρτα γραφικών την NVIDIA GT128 αλλά χρησιμοποιείς τους οδηγούς του linux. Εχεις κάνει εκατάσταση και ενεργοποιήση μήπως το compis για ποιό όμορφο desktop;
Δοκίμασε να κάνεις εγκατάσταση οδηγούς απο την NVIDIA.